Opcom 2010V Can OBD2 For Opel Firmware V1.45 PC Based

0.35Kg

Call for Price

Submit a wholesale Inquiry
0 reward points
Call for Price

 

OPCOM 2010 diagnostic tool for Opel cars covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. opcom 2010 lets you read and clear fault codes, support many control units.
It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.

 


Opcom OP-Com 2010 V Can OBD2 for Opel Firmware V1.45
 
Top 4 Reasons to Get OPCOM:
 
1. Software Version: 201008
     Hardware Version: 1.45
2. OP-COM - PC Based Opel Diagnostic Tool
3. Language: English
4. Opcom Software Free Download
 
Note: Never Update It Online, It Will Damage The OP-COM ! There is no need to active the software, can be used directly

OPCOM 2010 Function:
 
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information
 
OPCOM 2010 Feature:
 
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
 
You can also run output tests on many controllers.
 
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
 
Package List:
 
1. OP COM Interface
2. USB Cable
3. Software and Drivers CD



There are currently no product reviews.
NOTE: Reviews require prior approval before they will be displayed

All goods are not marked are three packs of shops


Customer Videos: See all 0 videos
Customer Images: See all 0 images
Monday 13 April, 2015

This product was added to our catalog on Monday 13 April, 2015.