|
Easy to use Windows 98/2000/XP software:
* Read, Program, Erase Incremental Registers\EEPROM
*Erase time to Delivery State* 1-3 seconds
*Erase time to Delivery State for M35080V6 1-10 minutes
*Supported all clock rates 2.5, 5.0 and 6 MHz IC's.
*In-circuit/On-board EEPROM programming
*On-board EEPROM programming for M35080V6
*Self-Check capabilities
*Onboard processor ATmega16 allow to Firmware Update to new versions
*4 adaptors for SO8 device
Additional items you'll need to use this tool:
1) Host: A 32 Bit x86 based or Pentium PC with a free Com1-8 communication port.
2) Power supply: An 12 Volt / 500 mA
NOTE: Delivery State: The first 32 bytes (incremental registers) are set to all "0"s, 16 words at $0000 The EEPROM memory array $0020-$3FFF set to all $FF. The Status register set to $10 | 